It is essential to have a closed and controlled system
And we have it. An that is how we do things.
Storage and rooms
facilities
Correct conservation and subsequent distribution of any type of medication
We perform initial temperature mapping, always prior to storage, with temperature checks in critical areas.
One part is
temperature controlled (10-25 degrees Celsius).
A second part is cold (2-8 degrees Celsius).
Zero exposure to pollutants
At Distrimédica we perform daily cleaning duties to preserve medications of any type from dirt and/or smells.
As the only company in Spain to specify in sanitary transport, in no way will our customer’s merchandise be exposed to contamination from other types of products.
STORAGE
The best measures for our customers
In our warehouse we have several zone-bays. The loading and unloading zone is located next to the cold storage rooms to make sure the merchandise has the correct temperature at all times.
We carry out an initial temperature mapping prior to storage, with temperature checks in critical areas such as places close to the entrance and checks in different locations. A measurement probe is placed in the area of greatest temperature fluctuation. This mapping is repeated in summer and winter.
If all these measures weren’t enough, we have an audible alarm system and SMS notifications that detect temperature increases or decreases within the marked ranges.
In addition, we have a prevention service outside Distrimédica that periodically measures the thermohigrometric conditions of each and every one of the storage areas. The company in charge is ASSI Sistemas e Instrumentación.
Designed and adapted cool storage room areas
We guarantee good storage conditions, safe from changes in weather, that facilitate entry and exit of merchandise. The rooms are also separated from the rest of the warehouse, correctly signposted and with access restricted to authorised personnel only.
THE COLD STORAGE ROOM
Controlled temperature
We have an area of the controlled temperature chamber (10-25 degrees).
It is built with 80mm insulating metal panels. in this room there are two air conditioning units (by Sistema Inverter) with integrated heat pump and condensation control. The cooling capacity of the room is 3010 frig.kcl-.
We have a second cold area kept at (2-8 degrees Celsius).
It is also built with metallic insulating panels. This chamber has a watertight unit with horizontal condenser and a low-profile evaporator, designed for the perfect conservation of products at both positive and negative temperatures.
The doors that close and hermetically seal each room are manufactured with sandwich panels of galvanised sheet steel with epoxy primer and are lacquered and baked with polyester lacquer of 25 microns.
These doors also have insulation of 105/120/150mm with an injected polyurethane base, with a density of +/- 42kg per cubic metre.
Water-tightness is achieved by means of a double alveolus rubber weather strip on the sheet’s perimeter and another double-layered weather strip enclosing the perimeter of the sheet in stainless anodised aluminium. The protections are in stainless sheet metal with lock with key and unlocking, electrical automation and sheet metal of M1 polyurethane.
Our generator is designed with a 4 -stroke engine cooled by air and diesel with direct injection. The generator also has:
- Double support base to reduce vibrations and a large tank
- Overload protection by measurement of intensity and LED screen with a preheating system to facilitate starting with a 30MA differential, due to current leakage with 2 1xpce5 plugs (16a) and 1x16a (220v)
- Compact alternator with voltage regulation by AVR.
Our Clients
Trust us
We have the knowledge and experience to turn your needs into solutions.
